P30H, Transducer for Parameters in DC Networks

Item number: P30Hff

  • Programmable input for current and voltage and other DC network parameters
  • Input,  output signals and power supply galvanically isolated
  • Internal data memory for 534.336 samples
  • Output standard signal variants: 0/4-20mA or 0-10V
  • 2 Relay outputs, normally open
  • Supply voltage variants: 85-253VDC/AC or 20-40VAC / 20-60VDC
  • Category: Measuring Transducers

    Analogue Output / Supply Voltage

    Price on application

    Exp. shipping time: ca. 1-2 weeks

    There are variations of this item. Please select the variation you wish.


    Description

    P30H, Transducer for Parameters in DC Networks

    The P30H transducer from  LUMEL is designed for measurements in photovoltaic systems, battery systems, telecommunication systems and traction systems (e.g.trams). It measures voltage, current (via shunt resistance), power, energy and other direct current parameters and converts them into current or voltage standard signals. 

    The output signal is galvanically isolated from the input signal and the power supply. The transducer has programmable measurement and auxiliary functions. Measuring and auxiliary functions  can be programmed via buttons RS-485 interface (optional) or via standard web browser via the device's own homepage (optional)

    Programmable input:
       + DC network parameters
       + Current through shunt (±150mV): max. 15,000A
       + Voltage 0...12/48/100/250VDC or
                           0...600/1000V via optional voltage dividers D5

    3 outputs:
       OUT1: analogue output, current or voltage output (select when ordering!)
       OUT2: relay, normally open, 30VDC/250VAC, 5A
       OUT3: relay, normally open, 30VDC/250VAC, 5A


    Other features:

  • Display: LCD,  2 x 8 digits, backlit
  • Supply voltage: 85-253VAC/DC or 20-50VAC/DC (please select when ordering!)
  • Conversion of any measured variable to an analogue output signal based on the characteristic 
  • Relay alarms with 6 working modes
  • Input signal acquisition in programmable time intervals in the internal memory, max. 534,336 samples
  • Housing protection: IP40
  • DIN rail mounting 
  • Dimensions: 45 x 120 x 100mm³
  • Weight: <250g
  • Warranty: 3 years

  • Options upon surcharge:
    + Slot for SD memory card
    + Ethernet inerface with 2GB internal memory
    + Sensor supply voltage 24VDC/30mA instead of the OUT3 relay output
    + CAN interface with CANopen protocol
    + 2nd analogue output 0/4-20mA or 0-10V

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: