NSF34, AF Shielding Paint, Liquid, Ready for Use

Item number: NSF34ff

  • electrically conductive dispersion paint
  • solvent-free, vapour diffusion open, low-emission
  • vapour diffusible
  • colour: black
  • can be overpainted or overpapered
  • must be grounded
  • Category: LF Shielding Materials (EMC)

    Container Size:

    starting from 49,90 €

    including 19% VAT.

    Exp. shipping time: ca. 1 week

    There are variations of this item. Please select the variation you wish.


    NSF34, AF Shielding Paint against Electrical Fields, Liquid, Ready for Use

    Electrically conductive dispersion paint, based on acrylate and graphite.
    Solvent-free, vapour diffusion open, low-emission. Ready for painting after stirring up, according to the instructions for use. The shielding paint is quickly drying and can be used universally.
    Adheres to all common indoor grounds after appropriate preparatory work and can be easily overpainted or overpapered. Suitable for living and working rooms. It is frost resistant (tested for 5 freeze/thaw cycles) and thus can be shipped in winter time by air cargo or by ship, without any problems.  This shielding paint can be useed indoors as well as outdoors.

    The paint doesn't have any antenna effect for high frequency and it also doesn't shield any high frequency electromagnetic radiation.

    For a safe shielding of low frequency electrical AC fields and for deduction of electrostatic loads towards ground an adequate grounding is necessary.

    Single components which are necessary for the grounding don't belong to the scope of delivery and have to be ordered, separately. We recommend the installation of self-adhesive grounding tape EB1 or covering and grounding tape EB3 which are equipped with conductive glue, in combination with i.e. the grounding kit ESW or ESW+.  You find them here: "Grounding Accessories".

    Technical data:
    Surface resistance:  1-5 kOhms, depending on layer thickness
    Container size/colour: 1 litre/5 litre container / black
    Processing: painting, rolling or spraying (test paint is recommended)
    Application (coverage): Interior (7.5 m˛/l), exterior (5 m˛/l), depending on surface absorbency
    Drying time: can be overworked within 12-24 h
    Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc.
    Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Due to the high adhesive tensile strength (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm˛), applicable directly under pure organic plaster, no mineral pasters!
    Storage stability: unopened ca. 12 months, to be stored cool and frost free

    Attention, safety notice:
    The painted wall surfaces have to be grounded by qualified personnel. The electrical mains installation, particularly the earth leakage circuit breaker, grounding and equipotential bonding of the concerned rooms have to comply with the state of the technology.
    For the grounding we recommend to use the EGP grounding plate and the cover and grounding tape AEB5, please see under: "Grounding Accessories"

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision:

    Other customers have also bought the following items