ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm 1A

SKU: ND10-12100E1
Category: 96 x 96mm
Manufacturers: LUMEL

Measurements of up to 52 mains network parameters

Power supply via the measuring circuit

The displays take into account the values of programmed transformation ratios for upstream instrument transducers

Modbus RS-485 communication interface

Free eCon software

Two alarm outputs

Pulse output

Backlit 3.5" LCD display

3 years warranty

Input Current

168,36 €

incl. 19% VAT

: 0 Workdays (Other countries)

pc.

Description
Reviews

ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm

The ND10 meter from LUMEL is characterized by high measuring accuracy, easy to read backlit LED display and an attractive price.
It measures the mains network parameters in symmetrically and asymmetrically loaded 4-wire systems, with simultaneous display of the measured variables and digital transmission of their values.
The meter enables the control and optimization of electrical devices, industrial systems and industrial plants.
The ND10 is suitable for measuring: RMS values of voltage and current, active, apparent and reactive power, active and apparent energy, power factors, frequency as well as 10-, 30- and 60-minute averaged active power and THD (Total Harmonic Distortion). .
In addition the RMS value of the current in the neutral conductor is calculated from the vectors of the phase currents. The voltage and current values are multiplied by the set voltage and current transformation ratios of the transducers. The power and energy indicators take into account the programmed transformation ratios.
The value of eache measured variable can be transferred to a main system via the RS-485 interface.
The relay outputs signal if selected measured values have been exceeded.
The pulse output is intended for controlling the consumption of tree-phase active engergy.
The meter is equipped with detection and signaling of wrong phase order.
The ND10 is powered by the measuring circuit input voltage.
It has a galvanic isolation between individual blocks:
- voltage and current inputs
- RS-485 output
- pulse output

Characteristics:

Measurements of up to 52 mains network parameters
Power supply via the measuring circuit
The displays take into account the values of programmed transformation ratios for upstream instrument transducers
Modbus RS-485 communication interface
Free eCon software
Two alarm outputs
Pulse output
Backlit 3.5" LCD display
3 years warranty

Technical data:
Input current In: 1A
Input voltage Un: 3 x 230/400VAC

Display ranges:
Current In: 0.00-1.5kA (1A) 0r 0.00-60kA (5A) (via upstream optional current transducers)
Voltage L-N: 0.0-1.012MVAC (via upstream optional voltage transducer)
Voltage L-L: 0.0-1.752MVAC (via upstream optional voltage transducer)
Frequency 47.0-65.0Hz
Active power P, input or output: 0.00-9999MW
Reactive power Q, capacitive or inductive: 0.00-9999MVAr
Apparent power S_i: 0.00-9999MVA
Active energy EnP, input or output: 0-99,999,999.9kWh
Reactive energy EnQ, capacitive or inductive: 0-99,999.999.9kVArh
Power factor PF: -1.00 to 0 to 1.00
Tangens Phi: -1.2 - 0 - 1.2
Cosinus Phi: -1 - 1
Phi: -180 - 180
THD: 0-100%

Relay output: 2 x programmable relay output, potential-free contacts (NO), 250VAC/0.5AAC
Pulse output for active energy: NPN, open collector, passive, class A according to EN 6205-31, voltage: 18-27V, current: 10-27mA
RS- interface: RS-485 Modbus
Display: 3.5" LCD, monochrome, backlit
Weight: <300g
Dimensions: 96 x 96 x 77mm³
Housing protection: IP65 (front), IP20 (terminals)

There are no reviews yet.