MI053, Differential oscilloscope probe, 700V, 25MHz, x10/x100, CAT III
Potential-free, max. input voltage: 1kV.
These probes are suitable for all oscilloscopes with BNC input sockets and accordingly, for all Pico PC hosted Digital storage Oscilloscopes with 1MOhm input impedance.
Please note that the x10 function will not work with the ADC-10 or ADC-12 as the input impedance of these devices is not the same as a standard oscilloscope.
This is an active differential oscilloscope probe. The probe permits the measurement of signals which are not referenced to earth using a conventional earthed oscilloscope. This enables mains voltages to be tested. It is possible to measure and observe the waveforms of three phase supplies or the gate / control signals of semiconductor circuits. It is ideal for investigation of motor speed controls, uninterruptible power supplies, switch mode power supplies and process controllers.
Technical Data:
| Attenuation ranges |
10:1 / 100:1 |
| Input Voltage |
± 70V DC Inc Pk (10:1)
± 700 V dc Inc Pk (100:1) |
| Max differential |
AC @ 10:1 or 50 V rms Cat III ± 700 V DC Inc Pk
AC @ 100:1 or 500V rms Cat III ± 2400 V DC Inc Pk |
| Bandwidth |
DC to 25 MHz (-3 dB) |
| Accuracy |
± 2% |
| Rise time |
14ns |
| Input impedance |
4 MOhm / 5.5 pF each side to ground |
| Power requirements |
4 x AA cells or 6 V / 60 mA DC mains adapter |
MI053, Differential oscilloscope probe, 25 MHz, x 10/x 100
Potential-free, max. input voltage: 1kV.
These probes are suitable for all oscilloscopes with BNC input sockets and accordingly,
for all Pico PC hosted Digital storage Oscilloscopes with 1MOhm input impedance.
Please note that the x10 function will not work with the ADC-10 or ADC-12 as the input impedance of these devices is not the same as a standard oscilloscope.
The ADF25A is an active differential oscilloscope probe. The probe permits the measurement of signals which are not referenced to earth using a conventional earthed oscilloscope. This enables mains voltages to be tested. It is possible to measure and observe the waveforms of three phase supplies or the gate / control signals of semiconductor circuits. It is ideal for investigation of motor speed controls, uninterruptible power supplies, switch mode power supplies and process controllers.
Technical Data:
Attenuation ranges 10:1 / 100:1
Input Voltage ± 70V DC Inc Pk (10:1)
± 700 V dc Inc Pk (100:1)
Max differential ac @ 10:1 or 50 V rms Cat III ± 700 V DC Inc Pk
ac @ 100:1 or 500V rms Cat III ± 2400 V DC Inc Pk
Bandwidth DC to 25 MHz (-3 dB)
Accuracy ± 2%
Rise time 14ns
Input impedance 4 M? / 5.5 pF each side to ground
Power requirements 4 x AA cells or 6 V / 60 mA DC mains adapter
