LED Light Strip, Full-Spectrum Light

Item number: NN3535ff

  • Full spectrum LED light strip,
  • Overall length variants: 100cm, 60cm or 25cm
  • Power 20W/9W/3.5W
  • Light flux: 270 - 1400 lm, depending on variant
  • ON/OFF switch
  • Standby power consumption: 0.2 W
  • Colour temperature 5500K
  • Supply voltage: 12VDC
  • Variants with or without power supply
  • Flicker- free
  • 3 mounting options: magnet, clips or adhesive metal strips

Category: Full Spectrum LED Daylight Lamps

Variants

107,00 €

including 19% VAT.

There are variations of this item. Please select the variation you wish.


Description

LED Light Strip, Full-Spectrum Light

With this full spectrum LED light strip you can use the full spectrum light similar to sunlight directly above or on your work surfaces.
The slim design and simple mounting enable the use in many places, e.g. under kitchen hanging lockers, in offices or workshops.
The light strips are available in versions with 100cm/20W, 60cm/9W or 25cm/3.5W length/power. (please select when ordering!)
 
Application examples:
Private: Kitchen, dining room, dining area, children's room, hallway, utility room, bathroom, living room, shelves, caravan etc.
 
Business: In business premises, administration, offices, home offices, sales rooms, practices, therapy rooms etc.
  • Industry: Mechanical engineering, elevators, escalator shafts
  • Mobile: Caravan, trunk lighting, workshop trolleys, small vans (increased dielectric strength for battery operation)
  • Kitchen lighting
  • Control cabinet lighting/server cabinet lighting
  • Replacement of T5/T8 tube lamps
  • Exhibition construction
  • Marine lighting for interiors
  • Organ building
  • Medical supplies
The mounting is simple and easy to do. the light strip has 2 small but strong magnets on the back. 
This gives you 3 mounting options::
1. Simply attach the light bar magnetically to an existing metal surface.
2. Attach the 2 self-adhesive metal plates and then simply attach the light strip to it magnetically.
3. Screw on the 2 metal clips an then clip in the light strip.
 
The three available lengths are each available in variants with or without a power supply unit (please select when ordering!)
You can connect several light strips in series. The power unit supplied is designed for a total output of max. 40W.
The light strips, even of different lengths can simply be plugged together directly one after the other or connected using an extension cable.
Each light strip can then be switched separately using the built-in ON/OFF switch.
 
 
Ordering numbers/variants:
Ord. no.  Overall length  Power   Light flux  
NN3535-001 100cm with power supply  20W  1,400 lm
NN3535-002 100cm without power supply  20W  1,400 lm
NN3535-005 60cm with power supply 9W  720 lm
NN3535-006 60cm without power supply 9W 720 lm
NN3535-003 25cm with power supply 3.5W 270 lm
NN3535-004 25cm without power supply 3.5W 270 lm
 
 
Scope of delivery:
1. Set: 1 x light strip with mounting material, power supply, 2.10m long transparent extension cable
2. Stacking: 1 x light strip with mounting material (without power supply, without extension cable)
 
Mounting material: 2 self-adhesive metal plates, 2 metal clips with screws, 1 connector, 1 short connecting cable
 
 
Technical data:
Supply voltage 12-14VDC, 230VAC via power supply unit
Power: 20W / 9W / 3.5W
Overall lengths: 100cm / 60cm / 25cm
Energy efficiency class: A-A++
Light flux: 1.400 / 720 / 270 lumen
Colour spectrum: full spectrum light, similar to sunlight
Colour rendering index (CRI): Ra 93-95
Flicker content: flicker-free,  <1%
Beam angle: 140°
Dimmable: no
Lifetime: >30,000h
Switching cycles: > 20,000
Suitable for continuous operation
Ambient temperature:  -20 to +40°C
Housing protection: IP20
Protection class III (protective low voltage)
Dimensions (LxWxH): 100/60/25cm x 2cm x 1.45cm
Dimensions of the power supply: (LxBxH): 105 x 45 x 30mm³
Warranty: 3 years

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: