GMH 3810, Resistive Material Moisture Meter
Description
GMH 3810, Resistive Material Moisture Meter
with integrated measuring pins for measuring wood, plaster and building moisture.
New development with state-of-the-art microprocessor technique.
The absolute weight moisture of 493 materials like i.e. concrete, floor finish, brick stones, gypsum, lime stones, cardboard, polystyrene, MDF, cement mortar, bitumen, etc. is directly indicated.
New development with state-of-the-art microprocessor technique.
The absolute weight moisture of 493 materials like i.e. concrete, floor finish, brick stones, gypsum, lime stones, cardboard, polystyrene, MDF, cement mortar, bitumen, etc. is directly indicated.
The inconvenient use of conversion tables is a thing of the past.
In addition to the indicated moisture reading you get a moisture evaluation (wet, moist, dry) in nine steps.
Due to the measuring needles, integrated in the fortified front plate, a multiplicity of measurements are possible without additional accessories. For measuring hard materials, we recommend the additional accessories.
Technical data:
Measuring principle:
moisture: resistive material-moisture-measuring,
matching DIN EN 13183-2:2002
temperature internal: NTC
Characteristic curves: 494
Measuring range:
moisture: 0.0 to 100.0 % moisture content
(depending on characteristic curve)
temperature: -40.0...+200,0°C (-40.0...+392.0°F)
Evaluation: in 9 steps (dry ... wet)
Resolution: 0.1% resp. 0.1°C (0.1°F)
Accuracy device: (at nominal temperature = 25°C)
wood: ±0,2 % moisture content
(deviation from characteristic curve at range 6...30%)
building mat.: ±0,2 % moisture content
(deviation from characteristic curve)
Temperature compensation: automatically or manual
Measuring probe: 2 pin holders M6*0.75 with
19mm pins (12mm utilisable)
Perm. working temperature: -25 to 50°C
Storage temperature: -25 to +70°C
Relative humidity: 0 to +95%RH (non-condensing)
Display: two 4-digit LCDs
Power supply: 9V-battery, type IEC 6F22
Power consumption: approx. 2.5 mA
Dimensions / Weight: 142 x 71 x 26mm, 175g
Housing: Impact-resistant ABS plastic housing,
membrane keyboard, transparent panel. Front
side IP65, integrated pop-up clip
Functions: Hold, Auto-Hold, Sort, Auto,
Power Off (description refer to GMH3830)
moisture: resistive material-moisture-measuring,
matching DIN EN 13183-2:2002
temperature internal: NTC
Characteristic curves: 494
Measuring range:
moisture: 0.0 to 100.0 % moisture content
(depending on characteristic curve)
temperature: -40.0...+200,0°C (-40.0...+392.0°F)
Evaluation: in 9 steps (dry ... wet)
Resolution: 0.1% resp. 0.1°C (0.1°F)
Accuracy device: (at nominal temperature = 25°C)
wood: ±0,2 % moisture content
(deviation from characteristic curve at range 6...30%)
building mat.: ±0,2 % moisture content
(deviation from characteristic curve)
Temperature compensation: automatically or manual
Measuring probe: 2 pin holders M6*0.75 with
19mm pins (12mm utilisable)
Perm. working temperature: -25 to 50°C
Storage temperature: -25 to +70°C
Relative humidity: 0 to +95%RH (non-condensing)
Display: two 4-digit LCDs
Power supply: 9V-battery, type IEC 6F22
Power consumption: approx. 2.5 mA
Dimensions / Weight: 142 x 71 x 26mm, 175g
Housing: Impact-resistant ABS plastic housing,
membrane keyboard, transparent panel. Front
side IP65, integrated pop-up clip
Functions: Hold, Auto-Hold, Sort, Auto,
Power Off (description refer to GMH3830)