GEWAS 300 FG, Water Monitor in a Field Housing, without Sensor
Description
GEWAS 300 FG, Water Monitor in a Field Housing, without Sensor
Versatile alarm and protection device for wall mounting with universal input (screw terminals) for different external sensors. All sensors with a switching threshold of <100 kOhm can be connected, e.g. water sensors, float switches, level switches, magnetic contacts etc. In the event of an alarm the potential-free relay output can trigger an external alarm or a connected device (pump, machine) can be switched on or off.
In addition, an internal acoustic alarm sounds on the GEWAS 300 FG.
The Reset button must be pressed to clear the alarm.
The water monitor is well suited for the detection of conductive media (water etc.)
Weakly or non-conductive media (oils or fatty liquids) and media that form conductive foam or that build up an electrically insulating deposit on the electrodes are less suitable.
The measuring method for level detection is based on the conductive principle, i.e. the electrical conductivity of the medium is monitored. If the switching amplifier detects a value lower than the preset conductivity, the status "medium detected" is output.
If the power supply fails, the internal battery is automatically switched over.
The battery status is indicated by the "BAT" LED.
Technical data:
Power supply: 10-250V AC/DC
Power consumption: <2VA
Signal input:
Trigger threshold: <80 kOhm
Response time 2s
Relaiy switching output:
Contacts: changeover, potential-free
Contact voltage: < = 250VAC
Contact current: <=5A (ohmsche Last)
external alarm output: powered, 8V, 3kHz, < = 5mA
Housing protection: IP65
Operating temperature: -20 to +60°C
Storage temperature: -40 to +80°C
Condensation: not permitted
Red/Green LED: Display of the switching status of the relay, of the sensor, supply voltage and battery
Housing dimensions: 100 x 100 x 60mm³ (W x H x D)
Scope of delivery: Device, operating instructions
Optional accessories upon request:
GWF-1 Water sensor without plug, 2m cable (5m or 10m also possible)
GWF-2 fabric tape water sensor, suitable for ultrapure water, 2m cable, without plug
GSS-1 float switch for electrically non-conductive media, reed relay, 2m cable, without plug