G1113, Manometer, ±99,99hPa / ±1999,9hPa

Item number: G1113ff

  • Measurement of Over/Under or Differential Pressure
  • Two measuring ranges: ±9999.9Pa or 19999.9hPa
  • Selectable pressure units: hPa, mmHg, PSI, bar
  • 3-line illuminated display, overhead display at the push of a button
  • 4 connection variants available
  • Robust, long battery life
  • High resolution and accuracy
  • Extension of the resolution to 1Pa
  • Waterproof, IP67
  • Zero point stable and independent of position
  • Calibratable / traceable
  • Successor model for GDH 200-13
  • Made in Germany

Category: Gases & Liquids

Pressure Connection

starting from 221,34 €

including 19% VAT.

There are variations of this item. Please select the variation you wish.


G1113, Manometer, ±99,99hPa / ±1999,9hPa

The G 1113 serves as a manometer and measures the smallest differential pressures up to ±2000hPa with a maximum resolution of up to 1Pa in air or in non-corrosive / non-ionizing gases between the two pressure connections.
The instrument offers precision, speed and reliability in a compact, ergonomic housing.
It also impresses with its waterproof design according to IP67 (not for the pressure connections), as well as the illuminated 3-line display, which also offers an overhead display at the push of a button.
The sister device of the extremely high-resolution G 1107 is the first choice when differential pressures > ±200hPa are to be measured.
Up to ±2000 hPa is covered precisely and with high resolution.

HVAC: gas & burner pressures, filter test (e.g. automotive DPF, fuel cell filter, exhaust filter) with a maximum pressure of up to ±2bar or ±2000hPa.
The meter has a 1/8" universal port for the use of different pressure connections.
It is available in four variants (please select when ordering):
-UT:        2 x UT pressure connection for hoses 6 x 1mm (4mm inside) and 8 x 1mm (6mm inside)
-QC6:     2 x QC6 Quick Connect- connection for 6 x 1mm (±4mm inside) hoses
-ST6:      2 x ST6 Screw connection for 6 x 1mm (±4mm inside) hoses
-MCM:  2 x MCM mini quick-release connector for quick-release couplings
Technical data:
Measuring ranges: ±9999Pa (fine measurement)
                                   Units selectable: hPa, mmHg, PSI, bar
Measuring frequency: 2.5 measurements/s (Slow)
                                        25 measurements/s (Fast)
Overload: max. ±3000hPa
Accuracy (device): ±1% FSS typical at nominal temperature +25°C
                                      ±10% FSS max.
Measuring inputs: 2 universal ports for screwing in various pressure connections
Housing protection: IP67 (pressure connections must be protected from dirt and moisture)
Display: 3-line, with battery status display, background lighting, protected by a break-proof pane, overhead display at the push of a button 
General additional functions: HOLD, Min/Max
Additional special functions: Tare
                                                   High resolution measurement with 1Pa
                                                   Average value mode for measuring strongly fluctuating pressures
Ambient temperature: -20 to +50°C
Battery: 2 x AA batteries
Battery lifetime: ca. 3000h
Housing: break-proof ABS plastic
Dimensions: 108 x 54 x 28mm³ (H x W x D) without pressure connections
Weight: ca. 150g including batteries
Scope of delivery: Device, batteries, operating instructions, test report
Optional accessories:
ST-G1000 protective bag made from Nappa leather, with belt clip
other connection adaptors: UT, QC6, ST6 or MCM

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: