Frequency Master IV, RF Meter, 1MHz to 10GHz!

Frequency Master IV, RF Meter, 1MHz to 10GHz!

SKU: r4075
GTIN: 716715159550
Category: HF Radiation Meters and Accessories
Manufacturers: ROM Elektronik

triple spaced LCD for the simultaneous display of pulsed and non-pulsed readings

Big speaker - comfortable volume control via pushbuttons

Display of the detected radio system

Suitable also for 5G signals up to 10GHz

Coloured gradation of the readings via coloured LEDs, according to bau-biologic recommendations.

Selection of measuring units in mV/m or µW/m²

USB interface (optional available software license for longtime recordings)

2.137,24 €

incl. 19% VAT

Exp. shipping time: ca. 1-2 weeks
: 7 Workdays (DE - int. shipments may differ)

Description
Reviews

Frequency Master IV, RF Meter, 1MHz to 10GHz!

Features:

triple spaced LCD for the simultaneous display of pulsed and non-pulsed readings
Big speaker - comfortable volume control via pushbuttons
Display of the detected radio system
Suitable also for 5G signals up to 10GHz
Coloured gradation of the readings via coloured LEDs, according to bau-biologic recommendations.
Selection of measuring units in mV/m or µW/m²
USB interface (optional available software license for longtime recordings)
Built-in rechargeable battery (operation time up to 24 h)
Rugged aluminium housing, attractive design

The broadband Frequency Master IV is capable to capture the large frequency range of 1MHz to ca. 10GHz.

Therewith the previous frequency bands of the terrestrial TV, of the new digital radio, mobile phone frequencies, cordless phones, WLAN bands 2,4GHz and 5,8GHz, Bluetooth and IEEE, LTE, UMTS, WIMAX bands and also some RADAR frequencies are covered.
Via the built-in PeakHold function, also short-term reading peaks, i.e. RADAR pulses are reliably identified. When this function is activated, the given highest reading is "frozen" in the display. Particularly noteworthy is the excellent detection of signals with a high crest factor.

In order to meet the requirements of a large frequency range, the Frequency Master IV is shipped with two precision LogPer antennas. Besides the antenna for 900MHz up to 2.6GHz there is a second antenna for the frequency range 2.4GHz up to 11GHz.

Optionally, there is also a biconical antenna available. With this non-directional antenna a frequency range of ca. 20MHz up to 3GHz is covered.

The rugged aluminium housing contains also a big speaker, besides its heavy duty measuring electronics. Therewith, a full and detailed sound can be heard, which many customers appreciate.
The Frequency Master IV is capable - like us humans - to "hear" signals and to identify them, too! If there is a known signal present, it is identified and displayed immediately. Thus, being an unexperienced user, one is able to identify the radiation source(s) more easily.

Always the strongest signal(s) are detected and displayed. The digital DECT cordless phone of your neighbour as well as the WLAN of the internet café nearby and, of course, also mobile radio.

For the analysis of 3G, LTE, UMTS, 5G signals there is s.th. special: A separate signal LED, which is always lit if UMTS typical WCDMA signals are detected.

The built-in rechargeable battery is designed for a very long operation time of up to 24 hours! Thus, long-term recordings without a troublesome use of battery powerpacks, respectively power supplies are possible. The internal rechargeable battery is also charged just as it is connected to a computer via a USB interface cable.

The differentiation of the radiation sources via audio analysis is standard as well as the simultaneous differentiation of pulsed and non-pulsed radiation amount.

Twelve colour graded LEDs signalise at a glance, if the reading ranges in the true sense of the word still in the "green" or already in the "red" range.

The coloured gradation was chosen according to the current bau-biologic recommendations like i.e. SBM 2008.

Via a menu the measuring units (mV/m or µW/m²) can be selected.

The Frequency Master IV has a serial and a USB interface as well as an analogue recorder output, which can be used to log the readings directly on a PC or via a printer (long-term recordings).
By an optionally available PC software further analysis and logging possibilities are given.

Specifications:

Frequency range: ca. 1MHz to 6,000MHz, partially compensated

(ca. 1MHz to 10,000MHz with reduced accuracy)

Measuring procedure detector receiver

Measuring range: 6mV/m to 4,400mV/m resp. 0.1 to 50,000µW/m² (=10pW/cm² to 5µW/cm²)

Max. measuring sensitivity: better than 0.1 µW/m² (=10pW/cm²)

Accuracy: basic accuracy better than ± 3dB

Display: LCD, three-spaced, analogue and digital

Ambient temperature: -5°C to 40°C

Sizes: ca. 90mm x 220mm x 35mm

Functions: simultaneous measurement of pulsed and non-pulsed signals, peak hold,

selectable measuring units, adjustable volume control

Interfaces: headphone output, USB or serial interface, analogue voltage output 0-2.5VDC (Option)

Weight : ca. 500 grams

Power supply: built-in NiMH rechargeable battery

Operation time: ca. 24 h with fully charged battery

Scope of delivery: Frequency Master IV, 2 LogPer antennas, twisting tool, battery charger, instrument case)

There are no reviews yet.