Formaldemeter htV-M Kit & Calibration Standard, with Datalogger

Item number: 557 165

  • formaldehyde measurement, CH2O
  • measuring range: 0-10ppm
  • resolution: 0.01ppm
  • built in non-volatile memory that can be upgraded.
  • capable of up to one month of continuous monitoring.
  • real time clock.
  • built in alarm
  • mains or battery powered.
  • can be used as a manual hand held and a continuous monitoring data logger.
  • USB interface for direct connection to PC
  • Supplied with the htV-M download software
  • Category: Bau-Biology Instruments

    2.900,03 €

    including 19% VAT.

    Exp. shipping time: ca. 1-2 weeks

    : 7 workdays



    Formaldemeter htV-M Kit & Calibration Standard with Data Logger

    Sale only to Business Customers!

    Please note that we do not deliver these products to private customers, but only to business customers!

    • A built in non-volatile memory.
    • Capable of up to one month of continuous monitoring.
    • A real time clock.
    • Built in alarm
    • Mains or battery powered.
    • Can be used as a manual hand held and a continuous monitoring data logger.
    • USB interface for direct connection to PC for data download without the need of additional hardware.
    • Supplied with the htV-M download software.
    • Manufactured to ISO 9001:2000 quality standards and compliant to CE regulations.

    With the subject of Indoor Air Quality becoming more prominent and recognised throughout many different industries, it has become essential to be able to accurately monitor low levels of indoor pollutant gases.

    The htV-M can precisely measure formaldehyde concentrations in parts per million (ppm) and mg/m3 over a wide range of temperature and humidity. Fast and easy to use, pressing a single button gives an immediate indication of concentration levels.

    The improved Formaldemeter htV-M is reliable and simple to calibrate. The compact size means the htV-M is small enough to be used as a hand held device. The built in memory and real time clock enables the htV-m to log all 3 parameters and corresponding times, allowing improved monitoring and analysis opportunities.

    Alternatively a PC can automate the sampling and log data at specific times by a direct or wireless connection. This is advantageous as it allows the user more freedom and is a cost effective approach to taking such measurements.

    Technical Data:


    Sampling Method: 10ml snatch-sample of air taken by internal pump
    Sampling Frequency: 1 minute in normal IAQ conditions
    Response Time: 60 seconds in 'high accuracy' mode,
    approx. 8 seconds in 'lower accuracy' mode
    Memory: 7 days,
    optional memory extension for 1 month available
    Mechanical: 150 x 80 x 34mm³ ABS plastic case.
    Padded accessory-case 266 x 230 x 50mm
    Weight: 270g with 9V PP3 alkaline battery
    Total kit weighs 750g.


    Formaldehyde Sensor

    Type: Electrochemical manufactured by PPM Technology..
    Range: 0-10ppm as standard (0- 12.3 mg/m³ at 25°C).
    Extended range available on request.
    Resolution: 0.001 ppm
    Precision: 2%

    94% of all instrument readings meet the NIOSH criteria for an acceptable method when measuring 0.3ppm of formaldehyde over a relative humidity range of 25-70%. The NIOSH criterion for acceptability is that all results fall within ±25% of the true value at the 95% confidence level.
    Calibration: By user with supplied calibration standard or by original manufacturer.


    Temperature & Humidity Module

    Type: Interchangeable digital CMOSens®..
    Range: -40 to +128°C, 0–100% RH
    Accuracy: ±0.4°C, ±3% RH
    Optional upgrade to ±0.3°C, ±1.8% RH
    Calibrated to ISO/IEC17025 by manufacturer. Traceable by the ‘National Institute of Standards and Technology' and the ‘National Physical Laboratory'.





    Kit Contents:



    • Formaldemeter htV-M instrument with stand
    • Formaldehyde calibration standard tube
    • USB cable
    • Pack of phenol filters (10)
    • Thermometer
    • Ballpoint pen
    • Download Software (data download and device settings)
    • Operation manual on CD
    • Mains Adapter

    Optional accessories:

    • Calibration Standard: PPM supplies an easy-to-use formaldehyde calibration standard tube for checking and adjusting the calibration of the Formaldemeter htV. The tube produces a known concentration of formaldehyde vapour that can be sampled by the instrument to check accuracy and performance. The standard has a 100-sample capacity or a useful life of six months (whichever occurs sooner).
    • Desk Stand
    • Wall bracket
    • Pack of phenol filters (100pcs)
    • SPC-3 software (viewing and recording of real-time readings on the PC, alarm thresholds, generating curves and reports)

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: