Food Simulant Temperature Probe, -20 to +100°C

ETI

Food Simulant Temperature Probe, -20 to +100°C

SKU: 133-350ff

Category: Measuring Instruments

GTIN: 5024368186720
HAN: 133-352

Designed for cold food storage
Slow response time simulates actual food temperature
Reads from -20 to +100°C
Type K accuracy: ±0.5°C (0°C to 100°C)
Type T accuracy: ±0.2°C (-20°C to 70°C)
high accuracy
9mm x 100mm x 100mm

from

46,41 €

incl. 19% VAT , plus

pcs.

This item has variations. Please select the requested variation.

Food Simulant Temperature Probe, -20 to +100°C

This polypropylene food simulant probe is designed for use in refrigeration, food storage and chill cabinets.
The probe simulates the temperature of foods in chill cabinets and similar appliances.

"Temperature Regulations relate to Food Temperatures, not the Air Temperature"
When the door to a fridge or storage area is opened, air temperature immediately changes; but food temperatures remain more constant due to their mass.
The ETI Food Simulant Probes are designed to be slow reacting and dampen the rapid fluctuations in air temperature. This gives a more accurate representation of the conditions that stored provisions maintain.
The simulant probe consists of a block of food-safe Polypropylene, 9 mm x 100 mm x 100 mm, with the temperature sensor positioned in the centre of the block. This dampens any rapid changes in air temperature.
These probes are invaluable for use with datalogging equipment or temperature controlling and monitoring, where the recording of temperatures may just capture an erroneous figure due to a sudden but unimportant change in air temperature.

The probes are available in two variants as type K and type T thermocouple sensors and in three further variants with 1m, 3m or 5m cable length. Please select when ordering!

Delivery without the depicted data logger.

Technical data:
Measuring range: -20 to +100°C
Probe accuracy (type K high accuracy): ±0.5°C for 0 to +100°C

Probe accuracy (type T high accuracy): ±0.2°C for -20 to +70°C
Dimensions: 9mm x 100mm x 100mm
Cable insulation: PTFE
Cable length: 1m, 3m or 5m with flat mini thermocouple connector