EFM 023 ZBS, Static Electrical Field Meter with Analogue Output
Description
EFM 023 ZBS, Static Electrical Field Meter with Analogue Output
Thanks to its compact design and single- button operation the field meter EFM 023 is very user friendly. The antistatic plastic housing is EPA compatible. The EFM 023 has got very useful technical charakteristics, which other comparable instruments haven't got.
It contains ALL functions of the EFM 022 and also has an analogue ±1VDC output. This is switched on in the manual E-field meter ranges.
Menue controlled measuring distance preselection
Voltage potentials on the measured object can be determined by the preselection of the measuring distance directly. Thereby, there is no need of time consuming calculations. There are 5 measuring distances available, enabling an optimal handling of the device, even in problematic detection areas.
Hold function
The reading can be frozen in the display. Thus, also precise measurements can taken at difficult to access places.
E- Field Meter ranges, manually selected:
±20kV/m; ±200kV/m und ±1MV/m
Important! Only in this mode the analogue interface is switched on!
Very high zero-point stability
Thereby, zero-point adjustment before every measurement is not necessary, which is needed with other systems.
Measuring ranges:
Technical data:
| Distance 1cm: | 0 to 10kV |
| Distance 2cm: | 0 to 20kV |
| Distance 5cm: | 0 to 50kV |
| Distance 10cm: | 0 to 100kV |
| Distance 20cm: | 0 to 200kV |
Technical data:
| Dimensions: | 122mm x 70mm x 26mm ( L x W x H ) |
| Weight: | approx. 130g (without battery) |
| Power supply: | 9V Alkaline battery IEC 6F22 |
|
Display:
|
2-line alphanumeric LC-display with 12 digits each The measurement distance in cm will be displayed in the first line, the voltage potential will be indicated in volts in the second line. |
|
Accessories, supplied with the instrument: |
|
