EBHT-1R, EASYBus Sensor Module for Humidity and Temperature, Probe Length 50mm
Description
EBHT-1R, EASYBus Sensor Module for Humidity and Temperature, Probe Length 50mm
Sensor module with on-site display of temperature and humidity values.
The device measures the temperature and relative humidity in air or in non-corrosive / non-ionizing gases. From these measured variables, further variables can be calculated and output instead of the relative humidity. In normal operation, the selected humidity display value and the temperature in [°C] or [°F] are displayed alternately.
Technical data:
Measuring ranges
Humidity: 0.0 to 100.0% RH
recommended measuring range (standard): 30 to 80% r.F.
Temperature: -40.0 to +120.0°C or -40.0 to +248.0°F
Humidity: 0.0 to 100.0% RH
recommended measuring range (standard): 30 to 80% r.F.
Temperature: -40.0 to +120.0°C or -40.0 to +248.0°F
Wet bulb temperature: -27.0 to +60.0°C
Dew point temperature: -40.0 to +60.0°C
Enthalpy: -25.0 to +999.9 kJ/kg
Humidity content of the air: 0.0 to 640.0g/kg
Absolute humidity: 0.0 to 200.0g/m³
Dew point temperature: -40.0 to +60.0°C
Enthalpy: -25.0 to +999.9 kJ/kg
Humidity content of the air: 0.0 to 640.0g/kg
Absolute humidity: 0.0 to 200.0g/m³
Resolution: 0.1% r.F. or 0.1°C / 0.1°F
Accuracy: (at nominal temperature = 25°C)
Humidity: ±2.5% r.F. (in recommended measuring range)
Temperature: ±0.4% of the reading ±0.2°C
Electrical connection: Angled plug EN 175301-803/A (IP65), Output 2-pin connection, max. 1.5mm2 each, polarity-free
Humidity: ±2.5% r.F. (in recommended measuring range)
Temperature: ±0.4% of the reading ±0.2°C
Electrical connection: Angled plug EN 175301-803/A (IP65), Output 2-pin connection, max. 1.5mm2 each, polarity-free
Ambient temperature
Electronics, housing: -25 to +50°C
Sensor (probe stem): -40 to +100°C (briefly up to 120°C)
Probe stem diameter: 14mm, screw-off protective cap with stainless steel sieve filter insert (105μm).
Electronics, housing: -25 to +50°C
Sensor (probe stem): -40 to +100°C (briefly up to 120°C)
Probe stem diameter: 14mm, screw-off protective cap with stainless steel sieve filter insert (105μm).
Probe stem length with protective cap: ca. 50mm