EBG-CO2-1R, EASYBus Sensor Module for Carbon Dioxide, 0-2000ppm

Item number: EBG-CO2-1R

  • Measuring range: 0-2000ppm CO2
  • For indoor air quality monitoring of the CO2 MAC
  • For wall mounting
  • With on-site display
  • Excellent long-term stability
  • Autocalibration procedure
  • EASYBus interface
  • Angled plug connection

Category: E.A.S.Y.Bus- System

503,37 €

including 19% VAT.

: 0 workdays



EBG-CO2-1R, EASYBus Sensor Module for Carbon Dioxide, 0-2000ppm

  • Excellent long-term stability
  • Auto-calibration procedure
  • Monitoring of the recommended COlimit value for indoor air
Since CO2  is an important indicator for the quality of indoor air, it is extremely important in modern climate control systems to also record the CO2 content. The recommended COlimit value for indoor air is 1000ppm. With values above this, tiredness and poor concentration become noticeable. The high-quality and precise  CO2 sensor module works according to the infrared procedure (NDIR). An auto-calibration process compensates for aging effects and thus ensures excellent long-term stability of this module. There is also a display which, in addition to showing the current CO2 concentration and min/max values, also serves as a visual alarm indicator.
Technical data:
Measuring range: 0 - 2000ppm CO2
Measuring principle: Infrared procedure (NDIR)
Accuracy: ±50ppm ±2% of reading (at 20°C, 1023mbar)
Interface: EASYBus
Auxiliary power: 12-30 VDC, max. 600mA
Display: ca. 10mm high, 4-digit LCD display
Working conditions: -10 to +50°C, 5 to 95% RH, 850 to 1100hPa
Storage conditions: -25 to +60°C, 5 to 95% RH, 700 to 1100hPa
Electrical connection: Angled plug according to EN 175301-803/A (IP65),
    max. cable cross-section: 1.5mm²,
    cable diameter: 4.5 - 7mm
Terminal assignment: 2 x EASYBus, polarity-free 2 x auxiliary power
Fastening: With fastening holes for wall mounting
Mounting distance: 70 x 50mm (W x H)
Mounting screws: max. shaft diameter: 4mm
Special features: Min/max value memory, optical min/max alarm, zero point and slope adjustment possible via buttons
Housing: ABS
Dimensions: 82 x 80 x 55mm³ (without angled plug)
Weight: ca. 225g
Scope of delivery: Device, operating instructions

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: