ACSRF-4040, Tinytag Plus Receiver for Radio Data Loggers, LAN Interface, without Software

ACSRF-4040, Tinytag Plus Receiver for Radio Data Loggers, LAN Interface, without Software

This Radio Receiver ACSRF-4040 is supplied  without software as a spare part or for slave receiver purpose.

The Plus Radio Ethernet receiver is an important part of the Tinytag wireless data logging system. It controls the exchange of data with the wireless loggers and forwards the data received from the loggers to the computer running the Connect Gateway software (ideally installed on a server). The data can then be viewed across the network or the internet using the Tinytag Explorer Connect software.
The receiver is connected directly to the LAN, so there is no need to set up a computer in the area to be monitored.

The receiver is powered via a supplied PoE (Power over Ethernet) adapter.
In the event of a power failure on the computer, the receiver will be powered by backup batteries that will maintain the datalogger network until power is restored.
This allows faster access to the data when the system is working again.

Please note: This article is only one component of the Tinytag Radio Logger System.
For proper operation minimum one radio data logger and one Tinytag radio receiver with accompanying software are necessary!

Characteristics:

• radio receiver with LAN interface
• local receiver buffer memory for the readings of 2 weeks (10min interval)
• waterproof housing, IP67
• E-mail warnings possible if alarm limits are breached
• user replaceable akaline backup battery
• power supply via Ethernet (PoE)
• radio licence-free frequency: 869.88 MHz (EU version)
• self-configuring and easy to set up
• low battery warning

Technical data:
Radio frequency: 869.88MHz (EU Version)
Transmitting power: <5mW
Radio licence: not necessary
Integrated temperature sensor: 10k NTC thermistor
Temperature measuring range: -20°C to +55°C
Sensor response time: 10min until 90% FSK in moving air
Temperature logger resolution 0.01°C or better
Recording intervals: 2 min to 10 days
Operational temperature range: -18°C to +55°C
Ethernet interface
Housing protection: IP67, waterproof
Backup battery: 2 x Duracell Industrial ID1400 C (LR14) 1.5V (supplied)
Housing sizes: 241 x 148 x 63mm³ (h x w x d, incl. aerial)
Weight: 475g

This device is also available upon request as a version for Australia.