Reference Thermapen, Handy Reference Thermometer
- high accuracy, 0.01°C resolution
- 5-point UKAS Certificate included
- ideal for calibration comparison checks
- auto power on/off function
- one-handed operation
The Reference Thermapen thermometer is a high accuracy PT100 instrument that is supplied with a 5-point UKAS Certificate of Calibration. Each certificate indicates deviations from standards at various check points: -18, 0, 40, 70 and 100 °C. Special ranges may be certified by arrangement with the ETI UKAS calibration laboratory.
The Reference Thermapen thermometer is ideal for comparison checking the calibration and accuracy of other thermometers and probes, when used in conjunction with a stable temperature heat or chill source. The instruments measure temperature over the range of -169.99 to 199.99 °C with a resolution of 0.01 °C and an accuracy of ±0.07 °C.
The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are displayed, when applicable. Each Reference Thermapen is powered by two lithium coin cell batteries with a minimum life expectancy of 1000 hours.
The Reference Thermapen incorporates a stainless steel, liquid/penetration probe Ø3.3 x 108 mm, that conveniently folds back through 180 degrees into the side of the instrument when not in use.
Technical Data:
range: -169.99 to 199.99 °C
resolution: 0.01 °C
accuracy: ±0.07 °C (-30 to 149.99 °C) otherwise ±0.2 °C
battery: 2 x 3 volt CR2032 lithium coin cell
battery life: 1000 hours
sensor type: PT100
display: 12 mm LCD, 5 digits
dimensions: 19 x 47 x 153 mm³
weight: 97 grams
Supplied in a zip pouch with belt strap
A UKAS Certificate of Calibration is included.
Optional accessories:
e830-260 protective silicone boot
e830-110 protective wallet
e832-200 wall bracket
|
