C-30ZX, Ozone Monitor with Alarm, 0.02 - 0.14ppm

SKU: C-30ZX
Category: Near-Earth Ozone
Manufacturers: ECO Sensors

measuring range: 0.02 - 0.14ppm

LED bar display

cost-effective fixed mount ozone monitor

alarm can be switched off

analogue output

942,48 €

incl. 19% VAT

Exp. shipping time: ca. 2-3 weeks
: 7 Workdays (Other countries)

pc.

Description
Reviews

C-30ZX, Ozone Monitor with Alarm for fixed Ozone Monitoring, 0.02 - 0.14 ppm

For water treatment plants, pulp bleaching mills, ozone generator monitors, photocopier and laser printer centers, fumigation projects, HVAC and indoor air quality systems, vehicular pollution monitors, research labs and pilot plants, and wherever ozone exposure is possible: the C-30ZX has a very fast and continuous response. It is rugged and versitile. There are no touchy controls.

Continuous monitoring of the ambient air quality. The ozone concentration of the air is displayed via the coloured LED bar scale.
An alarm tone sounds, when ozone concentration in the air exceeds 0.1ppm (another limit value can also be set).
Data output for data aquisiton and controlling a remote alarm or other equipment enausgang
Very easy to install. The handling of the ozone meter is simple and doesn't need any special knowledge.
Effectively no maintenance necessary.
The most cost-effective ozone monitor with alarm tone and analog output on the market!

Technical data:

Measuring Principle: HMOS (Heated Metal Oxide Sensor), diffusion
Measuring range: 0.02 to 0.14ppm on the LED bar display,
                         0.02 to 0.30ppm via an external (optional) display.
Response time: Within tenths of seconds of ozone reaching the sensor
Sensitivity: Detection threshold at 0.02ppm
Accuracy: 10-20%, depending on the conditions
Coloured LED bar display: green (normal),
                                          yellow from 0.05ppm (caution),
                                          red from 0.1ppm (danger).
Analog output: 0-3VDC for connection of a voltmeter or a datalogger
Relay switching output: changeover, max.30V ACor DC / 1A

Interface with analog and I/O signal for data loggers
and for controlling a remote alarm or other equipment.
Ozone concentration which triggers the alarm can be set (standard: 0.1ppm)
Response time: a few 10 seconds
Power supply: 12 VDC, 300 - 500mA, European power supply 230VAC is included
Sizes: 85 x 35 x 60mm³
Weight: 140g

There are no reviews yet.